Isw Horizontal Inline Centrifugal Circulation Booster Pump Horizontal Inline Centrifugal Pump
Overview Product Description Application transferring for clean water and other liquids Water supply system ,filtration
Basic Info
Model NO. | 50-160 |
Working Pressure | High Pressure Pump |
Influent Type of Impeller | Single Suction Pump |
Position of Pump Shaft | Horizontal Pump |
Pump Casing Combined | Horizontal Split Pumps |
Mounting Height | Suction Centrifugal |
Impeller | Semi-Open |
Usage | Pump, Pumps, Ash Pumps |
Power | 0.55kw or Customized |
Voltage | 380V |
Speed | 1450rpm |
Transport Package | Export-Standard Package |
Specification | 50-160 |
Trademark | qihang jia |
Origin | China |
HS Code | 8413709990 |
Production Capacity | 120000 PC Per Year |
Product Description
Application- transferring for clean water and other liquids
- Water supply system ,filtration and transportation
- Pressure boosting and domestic hot water circulation
- Industrial application and equipment supporting system
- HVAC and fire fighting system
- Agricultural water irrigation ,etc
Operating conditions
- Max .ambient temperature :50ºC
- Liquid temperature range:0ºC-90ºC
- Max operating pressure :16bar
Pump
- Pump casing with anti-corrosive coating
- AISI304 stainless steel /cast iron impeller
- AISI304 Stainless steel shaft
- NSK bearing
- Wear resistance mechanical seal
Model | Power (KW) | Head (m) | Flow (m3/h) | Outlet (mm) |
25-125 | 0.75 | 20 | 4 | 25 |
25-160A | 1.1 | 28 | 3.7 | 25 |
32-160 | 1.5 | 32 | 4.5 | 32 |
40-200B | 2.2 | 38 | 5.5 | 40 |
40-160I | 3 | 32 | 12.5 | 40 |
50-200A | 4 | 44.5 | 11.7 | 50 |
50-200IB | 5.5 | 37 | 21.6 | 50 |
65-200 | 7.5 | 50 | 25 | 65 |
65-250A | 11 | 70 | 23.4 | 65 |
65-200I | 15 | 50 | 50 | 65 |
65-250IA | 18.5 | 70 | 46.8 | 65 |
80-315C | 22 | 85 | 41 | 80 |
80-315A | 30 | 105 | 45.8 | 80 |
80-250I | 37 | 80 | 100 | 80 |
100-315B | 45 | 93 | 86.4 | 100 |
125-250 | 55 | 80 | 160 | 125 |
100-315 | 75 | 125 | 100 | 100 |
125-315 | 90 | 125 | 160 | 125 |
150-350 | 110 | 150 | 160 | 150 |
200-270 | 132 | 80 | 400 | 200 |
200-300A | 200 | 112 | 352 | 200 |
200-330 | 220 | 128 | 400 | 200 |
who is the trouble of 2BV vacuum pump | who is 2BV vacuum pump or the possible cause of failure | Who is 2BV or vacuum to eliminate the reason | |||||||||||||||||
The motor does not start and there is no sound | Two power lines are broken | check wiring | |||||||||||||||||
The motor does not start ,there is a buzzing sound | 1) one wiring is broken and the motor rotor is locked 2) impeller failure 3) motor bearing failure | 1) drain clean pump if necessary and correct impeller clearance 2) change impeller 3) replace the bearing | |||||||||||||||||
When the motor starts ,the current circuit breaker Trips | 1)the winding is short circuited 2)motor overload 3) the exhaust pressure is too high 4) too much working fluid | 1)check the motor winding 2) reduce the flow rate of working fluid 3)reduce the exhaust pressure 4)reduce the working fluid | |||||||||||||||||
Excessive power consumption | Precipitation is produced | Clean and remove sediment | |||||||||||||||||
No vacuum is produced | 1) No working fluid 2)serious system leakage 3)The rotation direction is wrong | 1) check the working fluid 2)repair the leak 3) change two wires to change the direction of rotation | |||||||||||||||||
The vacuum is too low | 1)the pump is too small 2) the flow rate of working fluid too small 3) the working fluid temperature is too high(less than 15ºC) 4) corrosion 5) Slight system leakage 6) seal leakage | 1) use larger pump 2) increase the flow rate of working fluid 3)Cool the working fluid and increase the flow rate 4) replace the parts 5) repair the leak 6) check the seal | |||||||||||||||||
sharp noise | 1) cavitation 2) the flow rate of working fluid is too high | 1) connect the gas shield 2) check the working fluid and reduce the flow rate | |||||||||||||||||
leakage | The sealing gasket is damaged | check all sealing surfaces |
Q: Where is Your factory?
A: Taizhou city, Zhejiang Province.
Q: Do you accept OEM/ODM service?
A: Yes, avaliable.
Q: Are you trading company or manufacturer?
A: We are a manufacturer.
Q: What about the shipment?
A: By sea, By air and By express delivery.
Q: What is the delivery time?
A: It depends on the order quantity, usually 35days after confirmation.
Q: Can I buy different products in one container?
A: Yes, but no more than 5 models.
Q: What is the warranty time?
A: One year.
Q: Can you offer the sample?
A: Of course we can.
Send to us